Embedded Files
Need more information?
520 nm, Fabry-Perot LD, 10 mW,
Fiber-Coupled to Polarization Maintaining Fiber,
in BTF-14-pins Type 1 (Pump) Case
520 nm, Fabry-Perot LD, 10 mW,
Fiber-Coupled to Polarization Maintaining Fiber,
in BTF-14-pins Type 1 (Pump) Case
Drawings, 3D STEP models and Application Notes
can be found in the datasheet
FEATURES
Wavelength: 520 nm
CW optical power out of fiber: 10 mW
Polarization extinction ratio: 17 dB
Spectral width: 1 nm
Wavelength-temperature coefficient: 0.03 nm/°C
Choice of fiber:
single-mode 460-HP
Fiber length: from 20 to 100 cm, contact us for other length
FC/APC, or FC/UPC, or no connector, contact us for other types
Choice of package:
BTF: 14-pins "Butterfly" type 1 (Pump) package with TEC and thermistor for thermal stabilization
Threshold current: typ. 34 mA
CW Operating current: max. 80 mA
Operating voltage: typ. 6.5 V
Operation temperature: from -40 to +60 °C, LD stabilization temperature 25 °C
Storage temperature: from -20 to +60 °C
Soldering temperature: 260 °C, max 5 sec
Order Example: LD4B-520-FP-10-BTF-3-SMP03.5-FA-CW-0.5
We offer fiber-coupled laser diodes for the most demanding scientific and industrial applications. Through the implementation of proprietary design, packaging, and fiber coupling technology, these laser diodes offer exceptional reliability and coupling efficiency stability vs temperature variation. Each individual diode undergoes extensive testing procedures before being shipped to guarantee the utmost quality. The module design is tested according to Telcordia GR-468-CORE standard.
Safety and Handling Precautions
Ensure the module is stored or operated in environments where it is not in contact with agressive solvents, acids, bases or corrosive gases
Exceeding absolute maximum ratings even for a short time can cause permanent damage of the module
The module is sensitive to and can be broken by ESD (static electricity), thus all the necessary precauthions should be made (usage of antistatic mat, wrist bracelet, clothes etc.)
Laser diode module should be attached to an appropriate heatsink. Low-noise current source should be used for driving laser diode. For the modules with TEC an appropriate thermal controller should be used.
LD4B, UAB achieves business objectives and customer needs with social responsibility. We do not purchase any parts containing conflict minerals and check that the used components and materials are RoHS and REACH compliant.
Report abuse